HL-5470DW - Drukarka laserowa Brother to idealne rozwiązanie dla grup roboczych, oferujące wysoką prędkość druku do 38 str./min, podajnik papieru na 250 arkuszy oraz możliwość pracy w sieci bezprzewodowej. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
For use with models: HL-5440D, HL-5450DN, HL-5470DW, HL-5470DWT, HL-6180DW, HL-6180DWT
For additional support, please visit our website: Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Clear the message "Jam Tray" | Brother HL5450DN, HL5470DW, HL6180DW
For use with models: HL-5440D, HL-5450DN, HL-5470DW, HL-5470DWT, HL-6180DW, HL-6180DWT
For additional support, please visit our website:
An official Brother printer support resource Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Clear the message "Jam Rear" | Brother HL5450DN, HL5470DW, HL6180DW
For use with models: HL-5440D, HL-5450DN, HL-5470DW, HL-5470DWT, HL-6180DW, HL-6180DWT
For additional support, please visit our website:
An official Brother printer support resource Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Install using a USB connection | Brother HL5450DN, HL5470DW, HL6180DW
#brotherprinter
Сброс счетчиков тонера, фотобарабана. Инструкция TN-2335, TN-2375 для Brother HL L2300DR / 2340DWR / 2360DNR / 2365DWR Не печатает. Горит индикатор нет тонера. Как сбросить тонер?
Замените фотобарабан - как сбросить? Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to reset OPC Drum Unit for Brother HL-5440D HL-5450 HL-5470 HL-6180 DCP-8110DN DCP-8150DN DCP-8155DN DCP-8250DN MFC-8510DN MFC-8520DN MFC-8710DW MFC-8810DW MFC-8910DW MFC-8950DW DR-720 DR-3300 DR-3355 DR-3325
The drum unit is rated for 30,000 pages.
There are different part numbers for these drum unit depending on the region.
America DR720
Europe DR3300
Asia/Africa DR3355
Oceania DR3325
Note: there are three types of “Replace Drum” messages:
1. DRUM ERROR: clean the corona wire using the corona wire cleaner. Use a cotton swab dampened with alcohol or ammonia to clean the corona wire. Verify all electrical contacts between drum unit and printer. If this does not clear the error, the drum unit needs to be replaced.
2. REPLACE PART (Drum): The drum unit has exceeded the rated life. Do the reset procedure.
3. DRUM STOP: Print quality may be diminished if the unit is not replaced or remanufactured.
RESET PROCEDURES:
HL-5440D HL-5450 HL-5470
- Make sure the power is on.
- Open the front cover.
- Press and hold "GO" button until all lights light up.
- Once all six lights are lit up, release "GO" button.
- Close the front cover. The drum counter is reset.
HL-6180:
- Open the front cover.
- Press and hold the "GO" button. "DRUM CLEAR" will show on the display.
- Close the front cover.
- The drum counter is reset.
MFC and DCP Machines:
- Open the front cover and press "CLEAR." button
- The display shows "REPLACE DRUM?" Select "#1-YES."
- The display shows "ACCEPTED".
- Close the front cover. The drum counter is reset.
For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
email: @
other links:
------------------------------------------------------------------------- Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to Reset Brother HL-5450 DR720 DR3300 DR3355 Drum
Алгоритм сброса счетчика фотобарабана Brother HL-2240, HL-2260, HL-2280 (reset Drum-Unit)
1. Откройте переднюю крышку включенного принтера
2. Выключите принтер сетевым выключателем на боковой стенке принтера
3. Нажмите кнопку Go и удерживая её включите принтер
4. Когда загорятся все индикаторы кроме Ready отпустите кнопку Go, все индикаторы должны погаснуть
5. Нажмите кнопку Go и удерживайте до тех пор пока не загорятся индикаторы Ready и Error
6. Отпустите и нажмите кнопку Go, удерживайте её до тех пор пока не загорятся все индикаторы
7. Отпустите кнопку Go и закройте переднюю крышку принтера
Аппарат готов к печати.
Чтобы напечатать тестовую страницу нажмите три раза кнопку Go.
Больше инструкций по заправке картриджей и обнулению принтеров на сайте Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Как обнулить счетчик фотобарабана Brother HL-2240, HL-2260, HL-2280 (reset Drum-Unit)
How to remanufacture and reset OPC Drum Unit for Brother HL-5440D HL-5450 HL-5470 HL-6180 DCP-8110DN DCP-8150DN DCP-8155DN DCP-8250DN MFC-8510DN MFC-8520DN MFC-8710DW MFC-8810DW MFC-8910DW MFC-8950DW DR-720 DR-3300 DR-3355 DR-3325
The drum unit is rated for 30,000 pages.
There are different part numbers for these drum unit depending on the region.
America DR720
Europe DR3300
Asia/Africa DR3355
Oceania DR3325
REQUIRED THINGS:
- Drum
- Screwdriver
- Better if you have compressed air
Note: there are three types of “Replace Drum” messages:
1. DRUM ERROR: clean the corona wire using the corona wire cleaner. Use a cotton swab dampened with alcohol or ammonia to clean the corona wire. Verify all electrical contacts between drum unit and printer. If this does not clear the error, the drum unit needs to be replaced.
2. REPLACE PART (Drum): The drum unit has exceeded the rated life. Do the reset procedure.
3. DRUM STOP: Print quality may be diminished if the unit is not replaced or remanufactured.
RESET PROCEDURES:
HL-5440D HL-5450 HL-5470
- Make sure the power is on.
- Open the front cover.
- Press and hold "GO" button until all lights light up.
- Once all six lights are lit up, release "GO" button.
- Close the front cover. The drum counter is reset.
HL-6180:
- Open the front cover.
- Press and hold the "GO" button. "DRUM CLEAR" will show on the display.
- Close the front cover.
- The drum counter is reset.
MFC and DCP Machines:
- Open the front cover and press "CLEAR." button
- The display shows "REPLACE DRUM?" Select "#1-YES."
- The display shows "ACCEPTED".
- Close the front cover. The drum counter is reset.
For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
email: @
other links:
------------------------------------------------------------------------- Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to Rebuild BROTHER HL5450 DR720 DR3300 Drum Unit
The Brother™ HL-5470DWT is a cost efficient, reliable laser printer with a large paper capacity that is ideal for busy offices or small workgroups. It features fast, monochrome printing at up to 40ppm and dual paper trays for flexible paper handling and fewer refills (800 sheet total capacity‡). Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Brother High-Speed Laser Printer with Wireless Networking | HL-5470DWT
For use with models: HL-5470DW, HL-5470DWT, HL-6180DW, HL-6180DWT
For additional support, please visit our website:
An official Brother printer support resource Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Clear the message "Jam Inside" | Brother HL5470DW and HL6180DW
This video will demonstrate, how to print a status page for Brother HL-5450DN Model Printer. Here are steps to print a status or test page of Brother 5450 printer.
1- Make sure printer power is on
2- Press ''Go'' button 3 times
3- After pressing Go button three times the status page will print
That's All
#Brother5450 #PrintStatusPage #BroExperts
Here is text version of this video: Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How To Print Test / Status Page on Brother HL5450DN
Из видео можно узнать, как сбросить счетчики тонер (reset toner counter) и драм (reset drum counter) картриджей, комплекта подачи бумаги (reset PF-Kit MP), узла термозакрепления (reset Fuser Unit), комплекта ПБ1 (reset PF-Kit T1), блока лазера (reset Laser Unit) и фьюзера (reset Fuser Unit) на аппарате Brother HL-L5100DN
В компании Суперзаправка всегда можно отремонтировать оргтехнику и заправить картриджи.
Обращайтесь, будем рады помочь! Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Brother HL-L5100DN — сброс счетчиков тонера, барабана, комплекта ПБ1 и других
Change the toner on your Brother HL-L2370DW or HL-L2370DW XL printer with this video tutorial
Intro 00:00
Remove drum and toner 00:10
Separate drum and toner 00:20
Unpack new toner 00:30
Reassemble drum and toner and reinstall 00:40
Transcript:
Today we are going to change the toner on your Brother HLL2370DW.
Open the front cover. Remove the drum and toner assembly and place it on a clean flat surface. Placing scrap aper under your drum and toner is recommended.
Next, remove the toner cartridge from the drum unit by pressing the green lock lever. Be careful not to touch the drum roller during this process as this can cause print quality problems
Now unpack the new toner…..and install the cartridge into the drum unit
Listen for the cartridge to lock into place.
Next reinstall the drum and toner assembly into the machine and close the front cover.
For more Tutorials, FAQ's and Videos, visit us at
Thank you for choosing Brother
For more videos, tutorials, and FAQs visit our support site at:
Customers also searched:
Brother HL L2370DW change toner
Brother HL L2370DW change toner quick fix
Brother HL L2370DW XL change toner
Brother HL L2370DW XL change toner quick fix
An official Brother printer support resource Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Brother's High-Speed Laser Printer with Wireless Networking, Duplex and Dual Paper Trays Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Принтер Brother светодиоды Drum и Error мигают. Как очистить коронирующий провод.Сбой фотобарабана.
Brother Фотобарабан! Переместите зелёный ползунок слева направо и справа налево несколько раз. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Принтер Brother светодиоды Drum и Error мигают Как очистить коронирующий провод. Сбой фотобарабана.
A video showing how to replace a Brother HL-5370DW toner cartridge. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Сброс ошибки "Замените Тонер" (Replace Toner).
Данный способ подходит для принтеров с картриджами TN-3480, TN-3430 :
Brother Hl-L5000D Toner Reset
Brother Hl-L5100DN(T) Toner Reset
Brother Hl-L5200DW(T) Toner Reset Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Turning off deep sleep on brother hl-5100 - Written guide -
Navigate to ECOLOGY in the printer’s menu, then go into Sleep Time once the sleep time shows on the screen press Secure/Down Arrow & Cancel (Red Button) together DEEP SLEEP will be displayed press ok, ON will be displayed use the down arrow to select OFF then press OK and the printer will display ACCEPTED. Use back button to come out of the menu, power cycle the printer for the settings to be loaded. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
A video demonstrating the replacement of a Brother HL-5340D toner cartridge. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
- The HL-5450DNT high-speed mono laser printer has been designed to combine dependable quality with high-volume printing.
With a standard 800 sheet capacity, print speeds of up to 38ppm, automatic double-sided printing, professional 1,200dpi resolution, straightforward Ethernet connectivity and the first page ready in under 8.5 seconds, the HL-5450DNT is perfect for the pressure of any busy office.
Easily integrated with your existing system, the efficient HL-5450DNT is designed to offer the best of both worlds, with the optional 8,000-page high-yield toner cartridge, which can help you reduce printing costs and improve productivity.
Subscribe to our channel:
Read our handy hints, tips and news on the Brother Spark blog -
• Subscribe on YouTube -
• Follow us on Twitter -
• Follow us on LinkedIn -
• Like us on Facebook -
• Follow us on Instagram - Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Learn more:
We know there is never a good time to run out of ink or toner. Brother Refresh intelligently detects when you are running low and automatically triggers the right Brother Genuine replacement order and ships it right to your door.
Brother Refresh delivers peace of mind - with no recurring subscription cost or cancellation fees. You only pay for the ink or toner you need - and when you need it. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Как сбросить счетчик фотобарабана Brother DR-3400 для использования в лазерном принтере HL-L5000 L5100 L5200 L6200 L6250 L6300 6400 Series
DCP-L5500 L5600 L5650 L6600 Series
MFC-L5700 L5750 L5755 L5800 L5850 L5900 L6700 L6750 L6800 L6900 Series Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to remanufacture drum unit Brother DR-820 DR-890 DR-3400 DR-3425 DR-3455for use in HL-L5000 HL-L5100 HL-L5200 HL-L6200 HL-L6250 HL-L6300 HL-L6400 Series
DCP-L5500 L5600 L5650 L6600 Series
MFC-L5700 L5750 L5755 L5800 L5850 L5900 L6700 L6750 L6800 MFC-L6900DW
For any question or suggestion leave a comment
How to reset the drum unit:
--------------------------------------------
email: @
other links:
Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to rebuild Drum Brother DR820 890 3400 3425 HL-L5000
обнуление барабана
1 Включите устройство
2 Откройте верхнюю крышку и извлеките картридж
3 Теперь вставьте их обратно в аппарат ,и не закрывайте крышку
4 Четыре раза нажмите кнопку включения
5 Закройте крышку
обнуление картриджа
1 Вынуть картридж.Вставить лоток обратно
2 Нажимаем датчик и держим
3 После того как загудит именно двигатель принтера,а не блока лазера отпускаем и ждем 2секунды, затем повторно жмем датчик
4 Ждем окончания работы двигателя и отпускаем Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Добавлено г.
ОЧЕНЬ ВАЖНОЕ ЗАМЕЧАНИЕ !!!!!!!!!!!!!!!!!!!!!!!!!!
Выяснился нехороший момент, чистый не разбавленный ММ зелёного цвета портит печатающую голову принтеров Brother !!!!!
С принтерами Epson такой проблемы пока не заметил.
Поэтому при отмачивании и в дальнейшем в картриджи заправлять не менее 15-20%чернил по объёму относительно ММ, в таких пропорция проблем пока не заметил.
Правильным будет приобрести средство от известных фирм, таких как OCP или InkTec. Подробная статья про отмачивание принтера:
Brother MFC-J5910DW - реанимация, обслуживание и эксплуатация.
Ссылка на папку на Яндекс диске с материалами про струйные принтеры
Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Процедура снятия/установки фьюзера, замены термопленки, прижимного (резинового) вала и прижимной пластины нагревателя Brother HL-L5000D/L5100DN/L5200DW, DCP-L5500DN, MFC-L5700DN/L6900DW.
Для восстановления фьюзеров Brother HL-L5000D/L5100DN/L5200DW, DCP-L5500DN, MFC-L5700DN/L6900DW и подобных в нашем ассортименте давно имеются основные необходимые компоненты: термопленка и прижимной (резиновый) вал. Однако, во многих случаях замены этих компонентов недостаточно для получения ресурса восстановленного фьюзера, близкого к ресурсу оригинала. Причина этого - высокий износ прижимной пластины нагревателя.
Теперь, при восстановлении фьюзера ее можно заменить на новую, полностью эквивалентную оригиналу прижимную пластину CET291006. Это позволит повысить качество закрепления и значительно продлит ресурс термопленки.
Список использованных компонентов:
Термопленка - CET2815 -
Прижимной (резиновый) вал - CET2816 -
Прижимная пластина нагревателя - CET291006 -
Модели, к которым применима данная инструкция:
BROTHER: HL-5580D, HL-5585D, HL-5590DN, HL-5595DN, HL-L5000D, HL-L5100DN, HL-L5100DNT, HL-L5102DW, HL-L5200DW, HL-L5202DW, HL-L5200DWT, HL-L6200DW, HL-L6202DW, HL-L6250DN, HL-L6250DW, HL-L6200DWT, HL-L6300DW, HL-L6300DWT, HL-L6400DW, HL-L6400DWT, HL-L6402DW, DCP-L5500D, DCP-L5500DN, DCP-L5502DN, DCP-L5600DN, DCP-L5602DN, DCP-L5650DN, DCP-L5652DN, DCP-L6600DW, MFC-8530DN, MFC-8535DN, MFC-8540DN, MFC-L5700DN, MFC-L5700DW, MFC-L5702DW, MFC-L5750DW, MFC-L5755DW, MFC-L5800DW, MFC-L5802DW, MFC-L5850DW, MFC-L5900DW, MFC-L5902DW, MFC-L6700DW, MFC-L6702DW, MFC-L6750DW, MFC-L6800DW, MFC-L6900DW, MFC-L6902DW Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Восстановление фьюзера (печки) Brother HL-L5000D/L5100DN/L5200DW, DCP-L5500DN, MFC-L5700DN/L6900DW
Locate the default password for your Brother HL-L2395DW in this video tutorial.
Intro 00:00
Why you would need the password 00:10
Look on the rear panel 0:20
How to read the password 00:30
For machines without tags 00:40
How to enter the password 00:50
Transcript:
Today we’re going to locate the default password on your Brother HLL2395DW
Your machine’s default password is required in order to update the firmware or to access some advanced features
If your machine was manufactured in 2020 or later the password will be located on a label on the rear of the machine
Your password will be the characters to the right of “PWD:”
Your password will be exactly eight characters. It will be case sensitive and may include letters, numbers, and symbols
For older machines without a password label, use the word “initpass” or the word “access” as the default password. (remove this line for new machines)
When prompted, enter the default password into the password field.
If the password is not accepted, contact your system administrator and ensure the password has not been changed.
For more Tutorials, FAQ's and Videos, visit us at
Thank you for choosing Brother
For more videos, tutorials, and FAQs visit our support site at:
Customers also searched:
Brother HL L2395DW find password
An official Brother printer support resource Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Song:
"Pamgaea" Kevin MacLeod ()
Licensed under Creative Commons: By Attribution 3.0
Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to reset a drum – Brother HL -5140, HL -5240, HL -5340, HL -5350
Clean out paper scraps inside the drum and toner unit on your Brother HL-L2370DW or HL-L2370DW XL printer with this video tutorial
Intro 00:00
Let the machine cool down 00:10
Remove drum and toner 00:20
Separate drum and toner 00:30
Inspect drum 00:40
Reassemble drum and toner and reinstall 00:50
Transcript:
Today we are going to clear paper scraps inside the drum on your Brother HL-L2370DW.
Before working on your Brother machine, please allow it to run for 10 minutes to allow the fan to cool the internal parts.
Open the front cover. Remove the drum and toner assembly and place it on a clean flat surface. Placing scrap aper under your drum and toner is recommended.
Next, remove the toner cartridge from the drum unit by pressing the green lock lever. Carefully examine the drum for obstructions such labels, tape, or ripped paper. Remove any obstructions found.
Be careful not to touch the drum roller during this process as this can cause print quality problems. Then reinstall the toner cartridge into the drum unit. Listen for the cartridge to lock into place.
Next reinstall the drum and toner assembly into the machine and close the front cover.
For more Tutorials, FAQ's and Videos, visit us at
Thank you for choosing Brother
For more videos, tutorials, and FAQs visit our support site at:
Customers also searched:
Brother HL L2370DW paper scraps
Brother HL L2370DW paper scraps quick fix
Brother HL L2370DW W XL paper scraps
Brother HL L2370DW XL paper scraps quick fix
An official Brother printer support resource Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Fix wireless issues with your HL-L2370DW by replacing generic drivers in this video tutorial.
This video covers Windows computers only.
Intro 00:00
Right click printer icon 00:20
Select printer properties 0:30
Verify driver 00:40
If driver is missing 00:50
Transcript:
Today we are going to try a quick method to resolve printer offline issues on your Brother HLL2370DW
Generic Drivers can be a common cause of wireless issues with your Brother printer. In this video we will verify your driver configuration to ensure a generic driver did not get automatically installed.
To check your Brother Driver Configuration, open Control Panel and right click the Brother printer icon.
Select Printer Properties.
When the driver settings appear, click the Advanced Tab to verify the proper driver is applied.
The proper driver will contain your model number in the name
If your Brother machine is configured with a different driver, select the Brother driver from the drop-down menu and click Apply.
If your Brother driver is not listed, you will need to reinstall the Brother software. Which you can download from
For more tutorials, FAQs and videos, please visit.
For more Tutorials, FAQ's and Videos, visit us at
Thank you for choosing Brother
For more videos, tutorials, and FAQs visit our support site at:
Customers also searched:
Brother HL L2370DW update generic driver
An official Brother printer support resource Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
💡 МФУ Brother:
💡 Чернила для Brother:
💥 play – промокод на скидку 5% на расходные материалы всем подписчикам youtube-канала
Струйные МФУ Brother заслужили реноме «хороших рабочих лошадок». И производитель старается, чтобы функционал их устройств покрывал все запросы современного офиса и домашней печати.
#принтерBrother #originalamnet #какойпринтервыбрать
Важная информация! Внешний вид СНПЧ и чипов может изменяться. Мы предпринимаем все возможные меры для того, чтобы обеспечить точность и актуальность сведений в видеороликах. Но в товары могут в любой момент без предупреждения вноситься изменения. Таким образом, мы не можем гарантировать точности, полноты и актуальности материалов, программ и услуг, предоставляемых в видеороликах.
Присоединяйтесь к нам в соцсетях!
ВКонтакте:
Facebook:
Instagram:
Следите за новостями на нашем сайте: Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Clear the “Jam Rear,” error on your Brother HL-L2370DW or HL-L2370DW XL printer with this video tutorial
Intro 00:00
Let the machine cool down 00:10
Remove 2-sided tray 00:20
Open back cover and fuser cover 0:30
Close fuser cover and back cover 00:50
Reinstall 2-sided tray 01:00
Transcript:
Today we are going to clear the Jam Rear error on your Brother HLL2370DW.
Before working on your Brother machine, please allow it to run for 10 minutes to allow the fan to cool the internal parts.
Turn to the back of the machine and remove the 2-sided tray. Check for any paper jammed under the machine and remove.
Next, open the back cover. Verify that the green envelope levers are locked into the upward position. Then open the fuser cover by grabbing the Blue levers on the left and right side and pulling them towards you. Remove any jammed paper in the fuser unit by gently pulling with both hands.
Close the fuser cover. Now close the back cover. Replace the 2-sided tray, ensuring it is placed firmly inside the machine.
For more Tutorials, FAQ's and Videos, visit us at
Thank you for choosing Brother
For more videos, tutorials, and FAQs visit our support site at:
Customers also searched:
Brother HL L2370DW jam rear
Brother HL L2370DW jam rear quick fix
Brother HL L2370DW XL jam rear
Brother HL L2370DW XL jam rear quick fix
An official Brother printer support resource Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
A video demonstrating the removal and replacement of a Brother HL-2170W toner cartridge Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Shop Here:
In this short video, Matt shows you how to run the printhead alignment process of the Brother MFC-J4510DW inkjet printer. Whilst we have used the Brother Brother MFC-J4510DW in this video, but the method remains applicable for the Brother MFC-J4710DW also.
This is essential knowledge for resolving issues of regular lines, shadows, gaps or even "fuzzy" looking prints and is certainly worth doing when troubleshooting print quality issues. This handy alignment function can be performed directly from your Brother MFC-J4510DW, using its touchscreen control panel, removing a computer/laptop from the process entirely.
We hope you have found this video useful. Be sure to also keep up with us on Facebook () and Twitter (). Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Brother MFC-J4510DW: How to do Print Head Alignment
Learn how to set up your Brother MFC-J5340DW, MFC-J6540DW or MFC-J6940DW inkjet printer on a wireless network in this video tutorial. This method will use your machine’s control panel to establish the wireless connection.
Models covered:
Brother MFCJ5340DW
Brother MFCJ6540DW
Brother MFCJ6940DW
This video is for Macintosh users, for the Windows version click:
For more videos, tutorials, and FAQs visit our support site at:
Chapters:
Intro 00:00
Models covered 00:10
Find network name and password 00:20
Select network name 01:30
Enter network password 01:45
Add printer in OS - 02:35
AirPrint driver - 03:00
Install iPrint&Scan - 03:40
Transcript:
Welcome, today we’re going to connect your Brother MFCJ5340DW to a wireless network using the machine control panel
This video will cover multiple models and operating systems even though your machine may not match the model on the screen the overall process will be the same. (Covers MFC J6540DW and MFC J6940DW too)
Begin by pressing the settings icon on the touchscreen.
Then select the Network option
Select “WLAN” from the option list (Enable WLAN screen)
Select “Find Wi-Fi Network”
When prompted to enable WLAN, press “Yes”
Select your SSID or Network Name …and press “OK”
Enter your Network Key, using the touchscreen.
Confirm that your Network Key is correct …and press “OK”
Once the wireless connection is made, press “OK”
Now that your machine is connected, you’ll need to add the printer in the operating system. In the top left corner by click the Apple icon. Then click System Preferences. Next, double-click Printers & Scanners
Click the + plus button located below the printers list. Your machine should now display in the Add Printers window.
Select your Brother machine from the list. In the use dropdown verify that AirPrint has been selected. Then click Add.
If your machine is not found it is most likely due to an error in device discovery protocols. You will need to reboot your computer, the Brother machine, and attempt device discovery again.
Once added, your Brother machine is ready to print.
If your model features a scanner you will need to download the Brother iPrint&Scan app in order to scan to your computer.
From the Finder, navigate to Applications and then App Store. In the search box type brother iprint&scan. Then press Enter. On the listing for iPrint&Scan click get or the cloud icon.
After the download is complete, click Open. Click OK on the privacy agreement. and then click Select your Machine.
Verify the connection is set to Network. Select your model, then click OK
Click OK again
All the functions your machine supports will be displayed in the iPrint&Scan window. You are now ready to scan and print
For more Tutorials, FAQ's and Videos, visit us at
Thank you for choosing Brother
Customers also searched:
Brother MFC JDW wireless control panel Windows
Brother MFC J5340DW wireless setup control panel Windows
Brother MFC J6540DW wireless control panel Windows
Brother MFC J6540DW wireless setup control panel Windows
Brother MFC J6940DW wireless control panel Windows
Brother MFC J6940DW wireless setup control panel Windows
An official Brother printer support resource Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
MFCJ5340DW wireless setup from control panel - Macintosh
Easy fix for the Brother HL-2140 black and white printer if it starts jamming even when printing a single page. The spring on the sensor for the paper tray gets stretched out over time and won't pull back hard enough to tell the printer to stop trying to take more paper.
No special tools or parts necessary. A screwdriver is all you need.
Did you find this video useful? Contribute to my coffee fund at Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Clear the “Jam Tray,” error on your Brother HL-L2370DW or HL-L2370DW XL printer with this video tutorial
Intro 00:00
Let the machine cool down 00:10
Remove paper tray 00:20
Inspect paper and tray guides 00:30
Inspect tray gear 00:50
Reinstall paper tray 01:15
Transcript:
Today we are going to clear the Jam Tray error on your Brother HLL2370DW.
Before working on your Brother machine, please allow it to run for 10 minutes to allow the fan to cool the internal parts.
We will begin by pulling the paper tray completely out of the machine. If there is jammed paper in the tray opening, remove it using both hands.
Remove the paper from the paper tray and verify that the tray guides are set to the correct paper size.
Check the paper for damage or irregularities that could prevent it from feeding properly. Also verify the weight and thickness of the paper. Follow the link on the screen for more information on paper specifications.
Locate the white gears on the left side of the tray and rotate them, checking for gear damage and verifying that the metal plate raises and lowers as the gears are turned. If the gears are missing or damaged the tray will need to be replaced
Reload the paper into the paper tray. Ensure the tray guides are not pushed too tightly against the paper which can cause jamming. Also verify that the paper is not loaded above the maximum fill line.
Finally replace the paper tray firmly inside the machine.
For more Tutorials, FAQ's and Videos, visit us at
Thank you for choosing Brother
For more videos, tutorials, and FAQs visit our support site at:
Customers also searched:
Brother HL L2370DW jam tray
Brother HL L2370DW jam tray quick fix
Brother HL L2370DW XL jam tray
Brother HL L2370DW XL jam tray quick fix
An official Brother printer support resource Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Learn how to set up your Brother HL-L6300DW, HL-L6400DW, or HL-L6400DWT monochrome laser printer on a wireless (wi fi) network.
The model shown is the HL-L6400DW
Models covered:
Brother HLL6300DW printer
Brother HLL6400DW printer
Brother HLL6400DWT printer
This video is for Macintosh users, for the Windows version click:
For more videos, tutorials, and FAQs visit our support site at:
Quick Links / Table of Contents:
Models Covered 00:09
Required Information 00:19
Custom SSID and Network Key 00:47
Set up the Printer 01:03:00
Insert or Download the software 02:13
Running the Installer software 2:25
Enter your password 03:09
CUPS driver 04:01
Transcript:
Welcome. Today we’re going to walk through the wireless setup of your Brother HL-L6400DW monochrome laser printer.
This video will cover multiple models and operating systems. Even though your machine may not match the model on the screen, the overall process will be the same.
You will need to gather some information about your wireless network in order to connect your machine. You will need to know the SSID or Network Name of your router or access point …and you will need to know your Network Key or password. The default settings for your router or access point can be found on the equipment label. If your SSID or Network Key contain both uppercase and lowercase letters be sure to record them as both of these credentials are case sensitive. You will also need administrator rights.
If you have setup up a custom SSID and Network Password and cannot recall this information, please contact your router manufacturer. Setup cannot be accomplished without this information.
From the Home screen, press the Settings icon on the touchscreen.
Press the down arrow on the control panel until the “Network” option appear on the touchscreen.
Press “Network”
Press “WLAN” on the touchscreen.
Press “Setup Wizard”
If prompted to switch the interface press “Yes” otherwise continue
Select your SSID or Network Name from the list. Please note that if your network is set to hide the network name you will have to manually add your network name.
--Click here for more information on adding your network name:
Enter your Network Key using the touchscreen. Confirm that your Network Key is correct …and press “OK”
Press “Yes” to apply your settings
Once the wireless connection is made, press “OK”
Insert the installation disc or download the full driver and software package from . Navigate to your installation file and double click to begin installation.
--Click here for more information on downloading drivers:
Double-click on the brother icon on the desktop
Double click on the Driver Download or Start Here icon
Select "Wireless Network Connection (Wi-Fi)"and then click “Next”
Select your Brother machine from the list and click “Next.”
When the driver installer window opens, click “Continue”
Familiarize yourself with the environmental impacts of your Brother machine and click “Continue”
Click “Continue”
Click “Agree” to accept the license agreement
Click “Install” If prompted, enter your password and click “Install Software”
Click “Open”
Click on “Close”
Click “Add Printer.”
Choose your machine from the list. From the "Use" dropdown, choose the Brother CUPS driver for full printing capabilities.
Click “Add.”
Click “Next.”
For more Tutorials, FAQ's and Videos, visit us at
Thank you for choosing Brother
Brother – at your side
Customers also searched:
Brother HL L6300DW wireless
Brother HL L6400DW wireless
Brother HL L6400DWT wireless
An official Brother printer support resource Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Not a day goes by where there isn’t news regarding an information security breach. Proprietary information is under constant attack, and any weakness in the overall information workflow is being probed and exploited at both the network and device level. Ensuring information security is critical to establishing and maintaining confidentiality, so it’s an essential component to building the right document output infrastructure. Brother and its integrated partners have the expertise, hardware, software solutions and cloud services to address corporate mandates and complex government regulations, enabling enterprises to improve security with both internal and external clients. Learn more: Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Ремонт комп'ютерів у Києві: ремонт і обслуговування ПК, модернізація, діагностика і лагодження комп'ютерів за низькими цінами. Васильківська, 55, обслуговування, налаштування, комп'ютерна допомога вдома та в офісі недорого. Купити Витратний матеріал пробка бункера Brother HL-5470 Static Control (B5470HCAP). Швидке заправлення картриджів для будь-якого принтера з гарантією якості від сервісного центру VPS Group по місту Києву. Купити тонер фасований. +38 (093) 290-17-17