Контроллеры, адаптеры, модули контроллер LSI 9300-8E в Ситилинк —
Товар: [#908271] Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
О доступных RAID, HBA контроллерах. Чем они отличаются, ключевые особенности.
В этом ролике я рассказал о RAID, HBA контроллерах LSI и ADAPTEC, поговорили о интерфейсах подключения SFF8087, стандартах передачи данных SATA3 и SAS2, подводных камнях при использовании. Конкретно речь шла о ADAPTEC 6805, LSI 9260-8i, LSI 9211-8i. По любым вопросам пишите в личку и комменты.
Приобрести контроллеры:
LSI 9260-8i
LSI 9211-8i
ADAPTEC 6805
Мой профиль на авито:
Сотрудничество:
➞ keenythepro@
➞
Связь со мной:
➞
➞ Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
LSI SAS 9300-8e (12Gb/s SATA+SAS Host Bus Adapter)
Honestly I'm a little disappointed at how the Onyx performs on this controller, but these are still some pretty cool read/write speeds compared to a single drive setup. Remember that while TRIM doesn't work in RAID, garbage collection will, so as long as you leave the array idle sometimes, performance should not degrade. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
A short video on the LSI Logic 8 Port SATA Controller, LSI Logic SAS 9207-8i . This is UNRAID compatible 8 port SATA controller which makes a great low-cost addition to UNRAID, FreeNAS, or any application where you need 8 extra SATA ports. As these types of controllers run hot without allot of airflow, I will cover a nice PCI cooling solution to keep this controller cool.
====================
Affiliate LInks:
====================
LSI Logic SAS 9207-8i:
GDSTIME Graphic Card PCI Cooler:
Related Products I use in my build
WD RED Drives
WD RED 8T:
WD RED 6T:
WD RED 4T:
CyberPower CP850AVRLCD:
CyberPower CP1000AVRLCD:
Breakout Cables:
#SATA, #LSI Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
LSI 9207-8e SAS Controller Firmware Update Procedure, P20 IT Mode
Featured Products: (affiliate links)
LSI 9207-8e...
LSI 9207-8i...
Firmware Files...
Let's take a look at the firmware update procedure on an LSI 9207-8e SAS HBA controller. It's super easy but can be intimating at first (at least it was to me). This same process also applies to the 9207-8i version, and many other LSI card models providing you have a matching firmware.
Chapters:
00:00 Introduction
01:05 Firmware Download
02:30 FreeDOS Boot USB
04:53 Flashing Process
07:15 Conclusions
Contact Info:
Business email is lithiumsolardiy@. I am not available for personal project questions or consultation.
Disclaimers and Statements:
► I receive a small commission on purchases made using my affiliated links shared the video description and comments section. The views and opinions expressed here are my own, unbiased, and not influenced by this commission in any way. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
We have updated these older classroom series check out the new videos each new video has video notes and slides for download:
HP Smart RAID controllers: Sharpen your RAID skills
Maximize your Server RAID Performance
Sharpen your Server Skills: Server RAID
Walk-through installation of a server-based SAS RAID controller on a desktop computer. I'm using SATA drives but you can also use SAS. Be sure to consider how to cool your SAS controller and SAS drives as they need much more airflow than SATA drives.
If you would like to support the channel, Join our channel membership, it’s $ (less than a Starbucks coffee); see the “Join” button on our channel homepage.
OR
Subscribe to the channel as it helps our channel perform better on YouTube’s algorithm.
Check out our YouTube channel for more content!
YouTube:
Check out our Website:
Follow us on Twitter: @_TechSavvyTeam
Like us on Facebook:
Mr.V Linkedin:
Nathan Linkedin:
Follow on Instagram: techsavvyproductions
LSI 6GBs User Guide:
LSI User Guide :
Adaptec RAID Controllers:
Links to Documentation for a new video on RAID:
Video Notes in *.docx:
Video Notes in PDF:
Configuring HP Smart Array Controllers Reference Guide:
Email: mrvanderpool@
nathan@
#techsavvyproductions #vanderl2796 #LowellVanderpool Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to drive 120 HDDs with a single 2-port HBA IT mode SAS controller
In this video, I'm going to show you a setup with one LSI 9240-8i HBA card and 7 SAS expanders (IBM SAS2 46M0997) that can drive 120 HDDs! This came about because some people had asked the question of whether or not SAS expanders can be daisy chained and the answer is yes. Although the setup in this video isn't something I would normally recommend, due to the bottleneck and potential for catastrophic disk disconnects, it is a possibility to do this and perhaps might suit some very specific scenarios.
Products mentioned in this video that I sell:
Lenovo 9240-8i -
IBM SAS2 Expander -
or, as an alternative to the IBM, the Lenovo 03X3834:
If you'd like to buy a pre-flashed ready-to-go LSI IT mode SAS HBA card from me, checkout my eBay store:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping. Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Raid setup on Supermicro mini server with Raid controller LSI 9361
I've had some of my customers contact me saying they tried to follow my LSI troubleshooting video, but could not get into the LSI BIOS ROM SAS configuration utility. In this video I will show how this happens, and how to work around it.
LSI HBA Troubleshooting video:
If you'd like to support this channel, please consider shopping at my eBay store:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping. Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
In this video, I compare and contrast a variety of HBA (host bus adapter) SAS controllers with IT mode firmware.
If you're looking to buy an HBA or IT mode SAS controller, please check out my eBay store at:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping. Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
LSI 9260-8i SATA3 SAS 6Gb/s PCIe 2.0 RAID Card Unboxing & First Look Linus Tech Tips
This is a very high performance, high bandwidth RAID card that I'll be using to do some testing with the OCZ Onyx SSD drive. It supports all the latest features, and I even have a battery back up that I'll be talking about a little bit in case you ever wondered what a battery back up does on a RAID controller. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
In this video, I'm going to answer the question of 4kn compatibility with LSI IT mode HBA SAS controllers. Specifically, I'm going to test a HGST 8TB 4kn SAS HDD with 4 generations of LSI SAS controllers: the SAS2008, SAS2308, SAS3008, and SAS3408.
If you'd like to buy a pre-flashed ready-to-go LSI IT mode SAS HBA card from me, checkout my eBay store:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping. Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
I long chat about HBA vs. Raid controllers. Trying to explain how this works,,, there are always someone way smarter than me, in the comments, so be sure to check that out,, or be him :-)
[Affiliate Links]
Link US - HBA controller cards :
Link US - RAID Controller cards :
Link UK - HBA controller cards :
Link UK - RAID Controller cards :
________________________________________________________________
Even just 1$ a month, comes out to the same as Binge-watching like 400+ of me Videos every month.
My PlayHouse is a channel where i will show, what i am working on. I have this house, it is 168 Square Meters / ² and it is full, of half-finished projects.
I love working with heating, insulation, Servers, computers, Datacenter, green power, alternative energy, solar, wind and more. It all costs, but I'm trying to get the most out of my money, and my time. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Installing the LSI SAS controller in a Desktop Part 2
We have updated these older classroom series check out the new videos each new video has video notes and slides for download:
HP Smart RAID controllers: Sharpen your RAID skills
Maximize your Server RAID Performance
Sharpen your Server Skills: Server RAID
Here is the finished section on SAS RAID controller using 2.5 in laptop-style HDs. Walks through the steps of installing a server-based SAS RAID controller on a desktop computer. I am using SATA drives but you can also use SAS drives. Be careful to carefully consider how to cool your SAS controller and SAS drives in your case, they require much more airflow than do SATA drives.
If you would like to support the channel, Join our channel membership, it’s $ (less than a Starbucks coffee); see the “Join” button on our channel homepage.
OR
Subscribe to the channel as it helps our channel perform better on YouTube’s algorithm.
Check out our YouTube channel for more content!
YouTube:
Check out our Website:
Follow us on Twitter: @_TechSavvyTeam
Like us on Facebook:
Mr.V Linkedin:
Nathan Linkedin:
Follow on Instagram: techsavvyproductions
LSI 6GBs User Guide:
LSI User Guide :
Adaptec RAID Controllers:
Links to Documentation for a new video on RAID:
Video Notes in *.docx:
Video Notes in PDF:
Configuring HP Smart Array Controllers Reference Guide:
Email: mrvanderpool@
nathan@
#techsavvyproductions #vanderl2796 #LowellVanderpool Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
HBA disk controller cards vs RAID disk controller cards for your Home needs while saving money
HBA disk I/O cards vs. RAID disk I/O cards for your Home storage needs and save money.
The goal here to find out if a HBA base disk controller is better then a RAID disk I/O controller for Your IP based NAS needs while saving money.
My money is on RAID controllers for you can get some really nice cards that can do all types of RAID setup plus they can also do HBA mode or a mix of both. HBA Cards are really just RAID 0 style config at the basic level and can work well but that is about it.
Lastly I go with RAID for it is really cheap but very flexible. Nothing against HBA cards (outside of the pricing.) but speed vs. number of disks in not the only thing you want. Low overhead, better caching modes and so many other options. Hope this helps! Later!
Big thanks to LSI, Dell, HP and Logic for their site support on this effort...
Reference links
RAID Disk controllers tested only in RAID group but can also do HBA mode if needed. These models are low costs to buy:
INTEGRITY SMART ARRAY P812 PCI-E X8 24-PORT SAS RAID CONTROLLER WITH 1GB FLASH BACKED WRITE CACHE
HP 381513-B21 SMART ARRAY P800 16PORT PCI-E X8 SAS RAID CONTROLLER WITH 512MB CACHE WITH BATTERIES. REFURBISHED. IN STOCK
HP 462860-B21 SMART ARRAY P410 2-PORTS PCI EXPRESS X8 SAS RAID CONTROLLER CARD
DELL 342-4047 PERC H310 6GB/S PCI-EXPRESS 2.0 DUAL PORT SAS RAID CONTROLLER CARD
DELL 39H7H PERC H700 6GB PCI-E 2.0 SAS INTEGRATED RAID CONTROLLER
DELL 4Y5H1 PERC H330 12GB/S PCI-EXPRESS 3.0 SAS RAID CONTROLLER CARD
HBA Controllers running only in HBA configure mode. Most can only do HBA mode but some can support limited RAID option setup.
Dell 12DNW 6GB DUAL PORT (EXTERNAL) PCI-E SAS NON-RAID HOST BUS ADAPTER
HP 614988-B21 SCO8E 6GB/S 8PORT PCI-E X8 SAS LOW PROFILE HOST BUS ADAPTER
HP 726907-B21 H240 12GB DUAL PORT PCI-E 3.0 X8 SMART HOST BUS ADAPTER
LSI Logic 9201-16e SAS Controller Serial Attached SCSI PCI Express 2.0 X8 Lsi002
These disk controllers were tested on my lab servers:
x3 White box array Xeon server arrays from SuperMicro, Intel and ASUS (customer built)
x2 Dell 720xd arrays
x2 HP DL380-G7 servers Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How-To flash an LSI 9210-8i to IT mode for use in Freenas, Unraid and JBOD applications. A video guide to help avoid the downfalls of solutions on the internet that seemed to be not working after trial and error. This method works.
Files required to follow video instructions:
(Above link verified active 2/9/2023 for file [zip] 9210-8i_Package_P20_IR_IT_Firmware_BIOS_for_MSDOS_Windows)
Music:
*********************************************
Steps:
1) Download LSI-9211-8i file from ServeTheHome article link.
2) Download LSI-9210-8I P20 file from Broadcom link.
3) Download Rufus from link provided.
4) Create a new folder on your desktop.
5) Extract all contents of LSI-9211-8i to new folder.
6) Extract and file from LSI-9210-8i file to new folder.
7) Insert USB drive and Start Rufus.
8) Select USB drive, then FreeDOS, MBR, BIOS OR UEFI-CSM and File System FAT32. Click Start.
9) When finished, open USB drive, copy and paste contents from new folder to USB Drive.
10) Restart computer and enter the BIOS. Make sure USB drive is detected as UEFI: (USB DRIVE NAME)
11) Make sure that computer is set to UEFI Only and USB drive is first boot option once confirmed save and exit.
12) Once UEFI Shell has loaded, we need to check USB drive name, type: map -b and press enter.
13) Select the drive by entering in: fs(drive number) and colon. Ours was fs0: then press enter.
14) Check adapter cards detected by typing: -listall and press enter.
(I had two adapters, one I already updated. -c denotes which card you are selecting, followed by number of card to flash)
15) Flashing Firmware, I type: -c 1 -f and press enter.
16) If error code after flashing, verify update by running -listall again and checking firmware and nvdata version.
17) Flashing Bios I type: -c 1 -b and press enter.
18) Confirm Bios update was successful type: -listall and press enter.
19) Once done, type exit, press enter, wait for load, type exit again, remove usb drive and reboot machine.
20) Verify that cards are now in IT mode, when adapter screen prompts to do so, press CTRL+C.
You can now choose to change settings with the adapters if you wish, but your cards are now ready for FreeNAS, Unraid or JBOD applications! Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
I found a cheat to make older SAS HBA controllers work better for faster I/O from SSD disk arrays
OK while I was rebuilding my home Data Center, I did a side test to use more then one HBA controller to handle 96 SSD disk drives in four disk array chassises. Normally you use just one controller (HBA ofr RAID) to run all of the arrays disks, but in this test I use four controllers (24 disks each) and tested that against just using one controller. I was correct. While a single controller gave me a 1 to 1 rate for data transfer rates, instead I got 1 to 1.7 return on my IO when spread across many controllers. It worked! Not everyone can afford the newer LSI 9200 3200 SAS HBA controller cards at $500 a pop so this is a way to get greater I/O speed with older gear. Check out the video for the details. Have fun and keep trying things with old gear to reinvent new ways for with old stuff. Enjoy!
reference web links for LSI controllers:
Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to select boot device in LSI IT mode HBA SAS controller
In this video, I show you how to select the preferred and alternative boot devices in an LSI IT mode HBA SAS controller.
For pre-flashed IT mode HBA SAS controllers, checkout my eBay store here:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping.
Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Juergen Frick provides a brief introduction to Microsemi’s Adaptec Series 8E entry-level, 4 or 8-port, 12 Gbps SAS/SATA RAID adapters. These are two new skus of the award winning Series 8 product line, delivering a low profile, PCIe Gen3 adapter card with on-board DRAM that delivers the ideal price/performance for entry-level server systems.
For more information, visit this page: Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to fix SMBus issue on Dell HBA RAID SAS controllers by taping B5 B6 pins
Using Dell HBA or RAID SAS controllers in non-Dell machines can some times have a conflict with the SMBus; causing the system not to boot or other strange symptoms. In this video, I show how to fix this problem by taping PCI-E pins B5 B6.
For HBA SAS controllers that are pre-flashed to LSI IT mode, please check out my eBay store:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping.
Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Adaptec 5445 SATA SAS RAID Controller & MaxIQ SSD Cache Unboxing & First Look Linus Tech Tips
I was very surprised to have an opportunity to have a look at this RAID card and SSD. It's very cool. The way it works is that the RAID array will actually use the 32GB Intel X25-E SSD as a giant disk cache. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
"Мнение автора может не совпадать с мнением зрителей"
..............................................................................................................
Группа в Телеграм о моем заработке: (заходим только через мобильник или ВПН)
Чат для обсуждения событий, пролетающих в группе:
...............................................................................................................
Моя группа в ВК:
................................................................................................................
НОВЫЙ Промо-код на скидку в 5EUR при первом заказе в магазине : FW7N8J5Z
................................................................................................................
Ролик №1 о разъяснении моей работы:
Ролик-дополнение:
Еще дополнение:
Самая яркий пример работы + отзыв от подписчика:
................................................................................................................
Моя страница ВКонтакте:
Я В Инст.
Второй Live-канал:
................................................................................................................
#sas #windows #sata
................................................................................................................
Приятного просмотра! Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
A cheap way to test one SAS drive when fail with this connector and a SAS controller intern, cables.
Here is my update video on this topic and a better way to build out a test station in 2023:
A cheap way to test just one SAS drive at a time. this connector that run about $10 to $13 in cost, will allow you to hook up a failing SAS drive from a RAID group or storage pool and be able to test it on your local system by providing it with a SAS/SATA rated SAS controller. The motherboard is not rated to support SAS drives (unless a server mainboard with SAS controllers on board.). Just buy a HBA or SAS/SATA rated I/O controller for $$ off of Ebay to allow you to test single SAS drives using your PC system.
Thanks to Ronald Fadrigo as asking for more detail for this video.
Keep enjoying and the learning!
related sites:
For the SAS connector to 15 pin power $
For the SAS/SATA controller best to look at Ebay. Avoid RAID controllers if possible..
Enjoy! Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to turn a LSI SAS2208 RAID into a SAS2308 IT mode HBA on Supermicro X9DRH-7F
In this video, I will show how to turn a LSI SAS2208 hardware RAID controller into a SAS2308 IT mode HBA SAS controller so that you can use it with ZFS, or other software based storage technologies.
For the UEFI Shell part, here are the commands I used:
1) -c 0 -list (to list the controller)
2) -c 0 -o -f -b (to flash the firmware and BIOS ROM)
You can buy this Supermicro X9DRH-7F pre-flashed with IT mode firmware here:
For other pre-flashed IT Mode HBA SAS controllers, checkout my eBay store at:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping. Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
In this video, I'm going to show you how to remove the BIOS or UEFI ROM from a LSI IT mode HBA SAS controller. Although there are many ways to do this, the method I show in this video is among the simplest that I've found, but only if you're running Linux (including unraid).
To accomplish this, I use a tool called 'lsiutil', which you can find on the Internet. If you'd like to download a pre-compiled statically linked binary version from me, you can get it from:
If you need a pre-flashed LSI IT mode HBA SAS controller, be sure to checkout my eBay store here:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping.
Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to configure Raid - Raid 1 Configuration in dell servers
In this video we have used Dell T330 to show how to configure Raid in dell Servers using lifecycle controller.
In this video we will focus on raid 1 configuration using Lifecycle controller in Dell T330 Server.
Email: info@
Website: Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
In this video I show how I test my HBA SAS controllers that are pre-flashed to IT mode firmware. These are often used with systems that use software RAID, ZFS, FreeNAS, UNRAID, or other software based storage technologies.
If you need a HBA SAS controller in IT mode firmware, please check out my ebay store here:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping. Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
OK, so you asked so here is everything you need to know to test SAS drives or format them
Yes this is key to know for I have many question asking for more info on testing SAS drives.. Here you go. Listed below are recommended item to refer to to buy to setup your own SAS drive test station. You need one LSI like HBA or raid controller, a one internal SAS to SAS / power out quad cable. Or if you have a SAS backplan you can get the SAS to SATA bridge cable but you will need to address power. View the compelte video to know your options. Hope this helps some... Enjoy
P.S. Most motehrboard can not see SAS disks even if you have a SATAcable that can connect it up. You need a HBA of a RAID controller to see SAS drive unless you have a Server level motehrboard to work with.
Links
To use an LSI 9200 series HBA controller with internal SAS connections
The SAS to SAS/Power cable set.
The SAS to SATA/no power cable set but this needs a backplain for up to foru drive to slide into.
Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
The LSI SAS2008 SAS controller chipset was released in 2011 and is now 7 years old. This video looks at performance benchmarks for certain scenarios up to 16 HDDs and 2 SAS2008 controllers to see how it performs today in 2018.
This is a long video, so for the impatient:
8:05 - single disk setup and benchmark
21:53 - single disk benchmark results
22:55 - 8xHDD RAID0 setup and benchmark
28:37 - 8xHDD RAID0 benchmark results
30:22 - 16xHDD RAID0 setup and benchmark
34:38 - 16xHDD RAID0 benchmark results
37:27 - 8xHDD ZFS RAIDZ2 setup and benchmark
43:07 - 8xHDD ZFS RAIDZ2 benchmark results
44:12 - 16xHDD ZFS RAIDZ2 setup and benchmark
47:56 - 16xHDD ZFS RAIDZ2 benchmark results
49:07 - 2x8xHDD ZFS RAIDZ2 setup and benchmark
53:27 - FINAL benchmark results and comparison
For pre-flashed IT Mode HBA SAS controllers, checkout my eBay store at:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping.
Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Over the last couple of years running the Art of Server, I’ve helped thousands of you guys with your storage server builds. And the most frequent question I get after someone receives their IT mode HBA controller from my eBay store is: “help! my hard drives aren’t showing up!”
In fact, many of my videos were made to share the experiences I’ve gained while helping many of you troubleshoot your storage setups. However, those videos are scattered across my channel, so I thought I should put together a video that can help guide you to the various other videos on my channel. That’s the motivation for this video; where I’m going to share with you the top 13 reasons why “your drives aren’t showing up in your LSI HBA controller!”
1:10 - Reason #1 - Loose SAS cable connections
6:50 - Reason #2 - Power Disable feature ()
7:54 - Reason #3 - SMBus conflict ()
8:57 - Reason #4 - Incorrectly mounted drives in Dell sleds ()
9:55 - Reason #5 - Non-standard sector sizes ()
10:44 - Reason #6 - Defective SAS cables
13:06 - Reason #7 - Inactive PCIe slot
14:38 - Reason #8 - Reverse breakout cables ()
15:24 - Reason #9 - Linux kernel 5.8 LSI driver bug (
16:19 - Reason #10 - SFF-8482 breakout cables need power source
17:26 - Reason #11 - Using SATA-I drives
18:10 - Reason #12 - No status LED on server backplanes
19:30 - Reason #13 - Damaged SAS lanes on the HBA card
If you'd like to support this channel, please consider shopping at my eBay store:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping. Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Adaptec ASR-8405 RAID controller 4 port 2277600-R 12Gbps SAS/SATA
In this video, I re-run the I/O benchmarks on a pair of LSI SAS2308 HBAs and compare that with the previous benchmark using a pair of the older LSI SAS2008 HBAs.
Link to previous LSI SAS2008 video:
To jump to specific parts of the video:
7:42 - 8xHDD RAID0 setup and benchmark
12:33 - 8xHDD RAID0 benchmark results
14:56 - 16xHDD RAID0 setup and benchmark
16:45 - 16xHDD RAID0 benchmark results
20:17 - 8xHDD ZFS RAIDZ2 setup and benchmark
22:52 - 8xHDD ZFS RAIDZ2 benchmark results
24:21 - 16xHDD ZFS RAIDZ2 setup and benchmark
26:11 - 16xHDD ZFS RAIDZ2 benchmark results
27:44 - 2x8xHDD ZFS RAIDZ2 setup and benchmark
29:41 - 2x8xHDD ZFS RAIDZ2 benchmark results
30:55 - Final benchmark results and comparison
For pre-flashed IT Mode HBA SAS controllers, checkout my eBay store at:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping.
Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
LSI Storage Controllers Provide Best in Class Performance
LSI 6Gb/s SAS+SATA controllers provide best in class performance for a wide variety of storage applications. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
LSI SAS2008 with IBM SAS expander performance benchmarks
In this video, I examine the performance of a LSI SAS2008 controller with a IBM SAS2 expander card and compare the results to the previous results with 2x LSI SAS2008 controllers.
Link to previous video:
To jump to specific parts of the video:
4:35 - 8xHDD RAID0 setup and benchmark
9:59 - 8xHDD RAID0 benchmark results
11:19 - 16xHDD RAID0 setup and benchmark
15:07 - 16xHDD RAID0 benchmark results
17:56 - 8xHDD ZFS RAIDZ2 setup and benchmark
21:24 - 8xHDD ZFS RAIDZ2 benchmark results
21:48 - 16xHDD ZFS RAIDZ2 setup and benchmark
24:40 - 16xHDD ZFS RAIDZ2 benchmark results
26:46 - 2x8xHDD ZFS RAIDZ2 setup and benchmark
30:18 - Final benchmark results and comparison
For pre-flashed IT Mode HBA SAS controllers, checkout my eBay store at:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping.
Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
LSI's Broad Portfolio of RAID and HBA Storage Solutions
LSI provides the storage industry's broadest portfolio of RAID and HBA storage controllers. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
introduccion a las controladoras de RAID SAS o SATA para servidores
Si tenes que armar una RAID o queres saber que tipo de controladoras podes usar en tu servidor. Acá te explico eso. Para que puedas armar casi cualquier configuración de RAID
Obtenelo acá
Agregame en tu whatsapp: +1-859-878-2615 (acordate de agregar el signo MAS)
Queres asesoramiento?
Contratame en
Si queres asesoramiento gratuito hace tu pregunta en el foro
Queres una playera (remera) o tasa de GABAK? Entra acá:
Queres ayudarme economicamente $$$ ??
En paypal manda $$ acá paypal@
O en PATREON
Toda colaboración ayuda para que podamos seguir produciendo contenido de alta calidad, con tu ayuda podemos llegar mas lejos
CONOCES MIS OTROS CANALES DE YOUTUBE?
Ayudarme a generar subtítulos para mis videos en
Esos son mis productos sugeridos, puede hacer clic en el enlace y comprar para apoyar mi canal:
Fiverr
Fiverr-Desarrollo de E-commerce
VPN to connect from anywhere
Travel Insurance
Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
LSI product manager Bruce Grieshaber demonstrates Integrated RAID for the enterprise server IT environment with LSI HBAs Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
PowerEdge: How to Configure RAID with Device Settings (LifeCycle Controller)
PowerEdge: How to Configure RAID with Device Settings
This video explains how to configure RAID and to create a virtual disk using Device Settings on the 13th generation PowerEdge server. Since the boot mode on the 13th PowerEdge server is UEFI, the conventional RAID BIOS (Ctrl+R) cannot be used. In this case, follow the instruction in this video to configure RAID.
🔴 For more information on this topic check out the Knowledge Base Article here:
🔴 For more videos in the QuickTips series go to:
🔴 For more helpful tutorials, tips and tricks for Dell EMC Products, subscribe to our channel:
📺 Find our latest Video here:
📖 You can find our Knowledgebase filled with helpful articles here:
💻 Need help? Contact our Support
Community Forums:
Twitter:
Facebook:
Other Contact Options: Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Removing & Replacing the RAID Storage Controller (BCD104)
In this technical support video, learn how to change or replace the RAID Controller in your BCDVideo BCD104 IP Video Server.
For further information, visit Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Now it is easy to use your SAS hard drive as the external hard drive to your PC or Laptop.
Our SAS hard drive to USB 2.0/3.0 converter can help you!
Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
SAS to USB: Yes you can! I test two SAS (Serial Attached SCSI) to USB controllers.
I was told that you could not connect SAS (Serial Attached SCSI) enterprise hard drives to a PC via USB. So I set out to see if it was possible.
You could be like me and have 64 TB worth of drives laying around and not want to pay to replace that much Storage (it would be hundreds if not thousands of dollars for that much storage).
Or you could be a IT / Server engineer looking for a quick and cheap way to connect to SAS drives. Well as it turns out there is a solution.
I test two SAS to USB controller to see which one is better.
Timestamp
00:06 Intro- Yes you can use SAS HDs on USB
01:32 expensive Cxrt controller
01:42 Maiwo controller
02:12 ANYOYO controller
02:40 MAIWO ATTO error
03:14 Maiwo: ATTO Disk direct connect to PC
03:49 Maiwo: ATTO transfer error thought USB Hub
04:18 More Maiwo Errors
04:51 Maiwo controller Error when Direct to PC
05:35 Maiwo transer of 5GB
06:18 Flir Video of drive in use
06:44 ANYOYO EC-5351 SAS controller
07:14 ANYOYO Controller Speed 250MB/s
07:25 ANYOYO Backup 123GB in MInutes
07:36 Final Thoughts on SAS Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How to flash Fujitsu D3307 MegaRAID with LSI IT mode firmware
In this video, I'm going to show you how to flash a Fujitsu D3307 MegaRAID controller with LSI IT mode firmware for the LSI SAS3008 HBA controller.
The utilities you will need:
1) MegaCli (DOS version)
2) MegaRec (must be version Aug 04, 2015)
3) sas3flsh (DOS version)
You can also buy these 12Gbps HBA cards already flashed with IT firmware here:
If you'd like to support this channel, please consider shopping at my eBay store:
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping. Thank you for all your support! :-) Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
NCSA provides data management to some of the most challenging astronomical projects ever conceived. One is the Dark Energy Survey () that will collect digital data from astronomical observations in a database expected to grow by 400GB daily over the one and a half year life of the project to approximately 200TB of raw image data.
The Solution.
ICC delivered a configuration for NCSA that would maximize the in-box data throughput and provide the scalability for the clustered configurations the projects will generate. The system was built around the LSI MegaRAID SAS 9260-8i low-profile MD2 eight-port internal 6Gb/s SATA and SAS PCIe RAID controller and the LSI MegaRAID CacheCade software.
The addition of the CacheCade software al- lowed ICC to accelerate the performance of HDD arrays by enabling 3 x 160GB SSDs to be configured as an additional read cache resource available to the controller.
The Result.
The combination of the 6Gb/s RAID card from LSI and its CacheCade software solved a real performance problem. It was taking NCSA four to six hours to create database indices. With the new 9260-8i card and CacheCade software, that time fell to about 15 minutes, a factor of roughly 20:1. NCSA expects the performance benefits to grow linearly from adding up to three more 9260-8i cards with CacheCade software per system. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
How To: Setting up a RAID Array with a Highpoint Rocketraid 620 Controller + Provided Software
Just testing how a Rocketraid 620 Adapter works with setting up a RAID array with included software; though it is always recommended to do it through BIOS! Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Importing virtual disk configuration of a RAID Controller from 12G to 13G server
In this video, we will cover the process of importing the virtual disk configuration of a RAID controller from Dell’s 12th generation systems to 13th generation system.
Please note that, you should not import configurations that result in creation of more than 64 virtual disks for Enterprise level PERC Controller and 32 virtual disks for entry level PERC Controller. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Ремонт комп'ютерів в Києві: ремонт і обслуговування ПК, модернізація, діагностика і лагодження комп'ютерів за низькими цінами. Васильківська, 55, обслуговування, налаштування, комп'ютерна допомога вдома та в офісі недорого. Купити Контролер RAID LSI SAS 9300-8e (H5-25460-00). Швидке заправлення картриджів для будь-якого принтера з гарантією якості від сервісного центру VPS Group по місту Києву. Купити тонер фасований. +38 (093) 290-17-17