HAPPYMODEL ExpressLRS FPV ELRS ES900TX ES900RX 915MHz/868MHz Long Range Module for Radiomaster TX16S Micro Mini fpv Drone parts
ES915RX(Discontinued)
ES900 RX
ES915TX(Discontinued)
ES900TX
MCU
STM32F103RBH6
ESP8285
STM32F103C8T6
ESP32+ESP8285
RF Chip
SX1276IMLTRT
SX1276IMLTRT
SX1276IMLTRT
SX1276IMLTRT
Antenna plug
IPEX4
IPEX1
SMA
SMA
Dimension
16mm*10mm*3mm
12mm*12mm*3mm
55mm*39mm*13mm
55mm*39mm*11mm
Weight
/
/
Firmware upload
Betaflight pass-through
Betaflight pass-through or Wifi
SD-card or Configurator
Wifi or Configurator
Item: ExpressLRS ES900TX ES900RX 915MHz Long Range Module
Parameters:
ES900TX:
MCU:ESP32+ESP8285
Dimension: 55mm*39mm*11mm
Weight: (only the TX module)
Antenna connector: SMA
VCC input: 5~13v, Recommend 5v~9v
RF Frequency optional: 915mhz or 868mhz(EU)
Maximum Output Power: 33dBm(For 27dBm operation, we recommend add a fan for force cooling)
Wifi update firmware function for ES900TX would be available in a short time. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Не біндиться ELRS. Як прошити заблокований ELRS приймач?
Не біндиться ERLS. Як прошити заблокований ERLS приймач?
Збір на FPV дрони, які буде передано на потреби ЗСУ
🔗Посилання на банку
💳Номер картки банки
5375 4112 0750 3041
Телеграм канал - Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Happymodel's EP2 ELRS receiver is perfect for small FPV drones like tinywhoops. It measures only 10x10mm at weight. You do not need an extra antenna as this RX features a SMD ceramic antenna providing plenty of range.
Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Happymodel ExpressLRS Nano EP1 RX - Tiny, Ultra-light and Nano size #fpvdrone #happymodel
Price - Rs 1350
The Happymodel ELRS nano series receiver has an open-source program based on ExpressLRS. Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV Racing and Long Range FPV. These are very suitable for Tiny whoops because of the ultra-light and Nano size!
The Series
There are three in this series. The PP RX is designed by @Jye Smith from the ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
The Update
On the basis of PP RX, Happymodel has developed the Nano RX version of the ESP8285 named EP1 and EP2. The RF module of EP1/EP2 is the same as PP RX and uses ESP8285 MCU. You can upgrade firmware by WiFi! How simple!
Note: This is the EP1_RX Version.
Features
Designed by Jye Smith on the ExpressLRS development team.
TM32L432KBU6 MCU and SX1280 RF chip.
High-refresh-rate RF module
Specifications
EP1_RX
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
RF Chip: SX1280IMLTRT RF Module
Weight: (without antenna)
Antenna: Omnidirectional antenna
Dimension: 10mm*10mm*3mm
Firmware Target:aec8ad82
Firmware Upload: WiFi
Working voltage: 5v
Peak gain:
MCU: ESP8285
Type: ISM Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Happymodel ES900 Rx ELRS Boot Issue - Fix Using Manual Mode Flashing (NO LONGER REQUIRED)
UPDATE: Manual mode is no longer required as this is now the default behaviour in ExpressLRS . If you have an RX doing this, flash the newest version of ExpressLRS using standard mode in the configurator and your boot issue will be fixed.
My Happymodel ES900 Rx would get stuck booting which would prevent it from connecting to my Taranis QX7 radio or from flashing it. A quick replug would get it working but I wanted a better solution.
The developers for ExpressLRS already had identified the issue and had a solution. In short, an undersized voltage regulator prevents the ESP chip from completing its RF initializing as it pulls too much current. This results in the receiver freezing up. This work around essentially skips the RF initialization. A full description/explanation of the issue and solution can be found here:
For the manual options/build setting, a full description can be found here:
Introduction music is royalty free music from Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
ExpressLRS | Прошивка и обновление модулей, приемников и аппаратур.
#ELRS #R9M #BetaFPV #HappeModel #ExpressLRS
Обновление прошивок, перерошивка аппаратур управления и передающих модулей, настройка чего-то незнакомого. В первый раз это может вызвать страх и стресс:)
Из этого видео вы узнаете:
- Как обновить прошивку передающего модуля ExpressLRS
- Как обновить приемник ELRS
- Как прошить ExpressLRS на R9M
И всё это несколькими способами.
▶️Заходи на огонек🔥 в FPV кофейню -
Получай кучу плюшек 🍩 по цене чашечки кофе☕!
👇 Актуальный список моего "железа"
👇 Мои контакты:
VK -
Instagram -
Facebook -
Telegram -
Telegram канал (скидки, отзывы) -
Таблица с купонами и скидками -
Сотрудничество | Cooperation - cooperationfpv@
💪 Поддержать канал -
Донат - @BiletskiyFPV
Регистрируйся в Banggood -
Кеш-бек сервис -
Карта - 4441 1144 4472 4973
Поддержать БЕСПЛАТНО
Тебе не сложно, а мне приятно.
Железо из видео
▶️BetaFPV ExpressLRS Micro TX
BetaFPV -
Banggood -
AliExpress -
▶️FrSky R9M
Bang (ТХ) -
Bang (TX+RX) -
Ali - (TX, TX+RX) -
▶️FrSky R9mm
Ali -
▶️Radiomaster Zorro
RM Store -
Bang -
Ali -
▶️Radiomaster TX16S
RM Store -
Bang -
▶️Happymodel ExpressLRS Nano EP2 RX
Ali -
00:00 - Начало
00:21 - Устновка скачивание и установка ELRS Configurator
Страница скачивания -
Полезная страница -
01:13 - Интерфейс программы
04:27 - LUA скрипт
05:55 - Параметры конфигурации
Обновление OpenTX
12:11 - Если устройство не определяется. Драйвера.
Zadig (скорее всего непонадобится) -
CP210 -
13:04 - Прошивка передающего модуля через USB
13:37 - Встроенный WiFi
15:11 - Домашний WiFi
16:59 - FrSky R9M и ExpressLRS
19:22 - Обновление аппаратуры управления (пульта) со встроенным ExpressLRS
20:33 - Прошивка бутлоадера приемников FrSky R9mm/mini, R9mx, R9Slim+
Прошивка бутлоадера -
21:33 - Настройка Passpthrough (для прошивки приемников через полетный контроллер)
Подготовка -
23:43 - Прошивка приемников через полетный контроллер
25:21 - Прошивка приемников через WiFi
27:19 - Прошивка приемников встроенных в полетный контроллер (SPI RX)
27:37 - Эпилог
Источник инфы -
Свидетели ELRS - Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Happymodel ELRS F4 2G4 AIO 5in1 FC built-in SPI 2.4GHz ELRS RX - Range Issue / Short RSSI
Happymodel ExpressLRS Receier for fixed wing is a PWM receiver that can be used for your RC planes.
This receiver works on a ELRS protocol and so far I've been making good use of this RC protocol.
Check out CurryKitten for more info on this RX
Get it here at the Makerfire store and type ShogunEmperor for a 5% discount
Happymodel Official Team Pilots.
And of course not forgetting my teammates Youtube channels:
Nathan Loopz
Joseph De Guzman AKA 'Jiggy'
Tristan Teft AKA 'TDogFPV'
#elrspwmrx #receiverforfixedwing #elrsonrcplane Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
► BetaFPV ExpressLRS TX:
- AE:
► ExpressLRS Nano RX: || ||
► TBS Tango 2:
► DJI Mavic Air 2:
🎵 Music:
* About the test:
* Both Radio TXs were set to 100mw and mounted on the Tango 2
- ExpressLRS Version -
- Pkt Rate - 200Hz / 250Hz
- TLM Ratio: 1:64
- 🐜 Antenna:
╔════╡My Gear╞═════════════════════╡
║ ► Goggles - FatShark HDO2 -
║ ► RX Module -
║ ► Radio Controller - Radiomaster TX16S:
║ ► Battery Charger - Hobbymate D6 Duo Pro:
║ ►Lipo Batteries:
╚════════════════════════════════╡
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ →
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ I Really Appreciate Your Support!
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Find Me On Facebook:
►
Instagram:
►
Please consider supporting my channel by using my affiliated links:
* Banggood:
* HobbyCool:
* RDQ: ?aff=26
* Rotor Riot: ?aff=10
It doesn't add any extra cost to you and will help me to grow my channel and bring you high quality updated content.
Thanks in advance!
#ExpressLRS #BetaFPV #LongRange Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
happymodel expresslrs 915m es900TX/RX to update using wireless wifi
welcome to youtube mhsfpv!
your support is greatly appreciated. make sure you don't forget to support by just leaving.
• CLICK LIKE
• CLICK SHARE
• CLICK SUBSCRIBE
thank you so much for watching and supporting!
* do to update the TX Module / RX Receiver using wireless wi-fi. so make sure you follow the given steps to make it more successful. while updating. make sure the connector connection on your drone and radio is fully completed. part of the custom bind phrase is up to you to create enter the password. make sure the same password for your TX Module / RX Receiver. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Come si flasha la ricevente Happymodel ES900RX
PASSWORD WIFI Ricevente:
expresslrs
Se volete acquistare la ricevente e supportare il canale:
ES900RX
Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
#Happymodel #ExpressLRS #ES900TX and #ES900RX firmware update & binding instruction in 3 easy steps
ExpressLRS is an open source RC link for RC applications. It is based on the fantastic semtech SX127x/SX1280 hardware combined with an ESP8285, ESP32 or STM32. ExpressLRS supports a wide range of hardware platforms as well as both 900 MHz and 2.4 GHz frequency options. ExpressLRS uses LoRa modulation as well as reduced packet size to achieve best in class range and latency compared to current commercial offerings.
Shop ExpressLRS and 900Mhz
Model: ES900TX & ES900RX 915MHz
🛒 ELRS 900MHz -
🛒 ELRS 868MHz -
🛒 ES24TX -
🛒 ES24TX-Lite -
▬ Get Connected ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► YouTube:
► Twitter:
► Facebook:
► Website:
► Github:
▬ Shop my Affiliate Link ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🛒 DJI FPV Drone -
🛒 Express LRS -
🛒 2022 Budget Best Drone -
🛒 GoPro HERO Cameras -
🛒 Insta360 Camera -
🛒 Creality 3D® Ender-3 Pro 3D Printer - h
ExpressLRS Configurator
ExpressLRS can run at various packet rates, up to 500hz or down to 25hz depending on your preference of range or low latency. At 900 MHz a maximum of 200 Hz packet rate is supported. At 2.4 GHz a blistering 500 Hz is currently supported with a custom openTX binary with future plans to extend this to 1000 Hz.
ExpressLRS supports telemetry as optional feature. Enabling telemetry also adds support for the betaflight lua script.
ExpressLRS can be flashed into existing Frsky R9M hardware (RX and TX), Jumper R900 RXs, SiYi FM30 Hardware (Rx and TX), GHOST hardware (RX and TX) or Custom PCBs can be made if you enjoy tinkering. Happy Model released official ExpressLRS hardware (RX and TX) and several other manufacturers are preparing to offer offical ELRS hardware soon so stay tuned.
The video is time indexed so you can move around as you wish. Links to all software, firmware, and the products are included in the description below.
00:00 - Intro
00:33 - Step 1: Download and Install ExpressLRS Configurator
01:20 - Step 2: Update firmware for Happymodel ExpressLRS ES900RX
05:40 - Step 3 - Update firmware for Happymodel ExpressLRS ES900TX
10:44 - Outro
Please subscribe if you liked this kind of material. If you appreciate the kind of work I put into making this review, please watch other videos that I have on this channel ranging from all kinds of DIYs, products reviews and occasionally enjoying playing piano.
#fpv #vietnam #fpvvietnam #vietnamfpv #chetao #dientu #diy #suachua #huongdan #stabilizer #dronevietnam #flycam #shakydrone #drone #congnghe Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
When the power is turned on, LED lights up and it does not go into bind mode or WiFi mode. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
I try short range test of Happymodel ExpressLRS EP2 receiver with small ceramic antena. Power was 100mW, refresh rate was 500Hz. Distance was about 300m, and there was kind some trees betwen me and drone. Receiwer was instaled inside TPU canopy. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
ELRS MINI Receiver EPW5 ExpressLRS ELRS Nano Long Range Receiver RX for ES24TX Series RC Airplane FPV Long Range LR4 LR7
3 orders
For more details please click the link below↓
Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Una de las Nuevas funciones de la Versión Nueva de ELRS EXPRESS LRS.
Tu tienda online en España con envío en 24h
Ahí puedes encontrar los nuevos Módulos Pro Elrs 2,4ghz de Happymodel hasta 1W de potencia.
Y sus receptores compatibles
Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
ExpressLRS is the open source low latency, long range RC protocol. I find this ELRS TX and RX more responsive and have a better range then the regular that I previously used.
Where to get this TX and RX:-
Use this 5% discount code : ShogunEmperor
More information on ExpressLRS and its contributors in the link below:-
Lua script download
#lua-script
Advanced ELRS settings from Kaiju
ExpressLRS pre-flashed TX
ExpressLRS pre-flashed EP2 RX
Join my discord
or Twitch
Happymodel Official Team Pilots.
And of course not forgetting my teammates Youtube channels:
Nathan Loopz
Joseph De Guzman AKA 'Jiggy'
Don Johnson AKA AngryDonFPV
#teamhappymodel #happymodel #crux3 #happymodelteampilot Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
HappyModel ES24TX Slim Pro - Unboxing, Flash, Test
HappyModel ES24TX Slim Pro revised version (fix telemetry bug). Newer version with moxon antenna appeared few days after I bought this one. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
This is not a full step-by-step video on how to put together  HAPPYMODEL ExpressLRS ELRS Micro TX Module ES24TX Transmitter Module. This is my first time doing a video like this so I definitely left out some steps.  Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
flashing the HappyModel EP1 Dual the first time #expresslrs
In this video I will flash the HappyModel EP1 Dual with my settings to ExpressLRS V3.0
Wanna buy me a coffee? here you can:
Need an EP1 Dual (TCXO):
Notice on affiliated links
====================
Some links may be affiliated. This means, if you buy the linked items on the particular page, we will get a little benefit.
We use this to buy our stuff on our own. In short terms: By buying these items, you help us keep going!
You can support us by clicking on this link :
or
➡️ SUBSCRIBE for more
====================
Homepage:
Instagram:
#happymodel #ep1dual #expresslrs Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Trying two ELRS SMD RX (HappyModel PP, BETAFPV Lite RX V1 FLAT antenna )
Setting2 & Tes di setelah kemarin beberapa kali rx loss
Power 100mw 200hz
Telemetry 1:64 Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Happymodel #ExpressLRS 900Mhz maiden and test fly. Hapy happy
I am happy how it turns out with Happymodel #ExpressLRS 900Mhz maiden and test fly. RC command seems pretty smooth with 200Hz package update rate compared to old FrSky XM+ Rx. Telemetry lost is no longer nagging as well.
I am ordering some more Happymodel ExpressLRS 900Mhz receivers to convert all my quad to this affordable open source radio link. Here is my review of happymodel ExpressLRS 900Mhz system
Shop ExpressLRS and 900Mhz
Model: ES900TX & RX 915MHz
🛒 ELRS 900MHz -
🛒 ELRS 868MHz -
🛒 ES24TX -
🛒 ES24TX-Lite -
▬ Get Connected ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► YouTube:
► Twitter:
► Facebook:
► Website:
► Github:
ExpressLRS is an open source RC link for RC applications. It is based on the fantastic semtech SX127x/SX1280 hardware combined with an ESP8285, ESP32 or STM32. ExpressLRS supports a wide range of hardware platforms as well as both 900 MHz and 2.4 GHz frequency options. ExpressLRS uses #LoRa modulation as well as reduced packet size to achieve best in class range and latency compared to current commercial offerings.
ExpressLRS supports telemetry as optional feature. Enabling telemetry also adds support for the betaflight lua script.
ExpressLRS can be flashed into existing #Frsky #R9M hardware (RX and TX), Jumper R900 RXs, SiYi FM30 Hardware (Rx and TX), GHOST hardware (RX and TX) or Custom PCBs can be made if you enjoy tinkering. Happy Model released official ExpressLRS hardware (RX and TX) and several other manufacturers are preparing to offer official #ELRS hardware soon so stay tuned.
#fpv #vietnam #fpvvietnam #vietnamfpv #chetao #dientu #diy #suachua #huongdan #stabilizer #dronevietnam #flycam #shakydrone Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
This is the CrazyF4 2G4 ELRS Whoop Flight Controller from Happymodel also found on the ELRS Mobula6 Tiny Whoop. I built this with the Caddx Ant camera on a 75mm frame with the 0802 25,000kv Happymodel motors.
I've been flying this Whoop Flight Controller for awhile now and I must say its pretty robust and lasted longer that I thought it would.
Get it here:-
My quad
Happymodel ELRS Crazy F4 2G4 AIO
75mm Happymodel whoop frame(V4)
Caddx Ant camera
Happymodel 25,000Kv motors
NBD 40mm Azi props
Happymodel Official Team Pilots.
And of course not forgetting my teammates Youtube channels:
Nathan Loopz
Joseph De Guzman AKA 'Jiggy'
#besttinywhoop #besttinywhoop2021 #crazyf42g4elrs Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
ExpressLRS вздовж і впоперек. Налаштування, підключення, прошивка на кастомні частоти
This is the updated version with the green LED.
SDG chip bug seems to be fixed. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
En un vídeo anterior, que podemos ver en las sugerencias de la esquina superior derecha de la pantalla, mostramos como instalar ExpressLRS en un módulo R9M de Frsky, y en un receptor R9MX de la misma marca. En esta ocasión hemos comprado un receptor Happymodel a 868 megahercios. Estos receptores ya traen preinstalado ExpressLRS. Sin embargo, para poder enlazar con el receptor, tenemos que reinstalar el firmware con la misma configuración que ya tenemos en el módulo emisor.
Damos energía al receptor, y esperamos un minuto a que entre en el modo de enlace. Este modo se distingue porque el receptor parpadea muy rápidamente.
Bajamos e instalamos la última versión del configurador.
En el configurador, elegimos el modelo de receptor por la vía del wifi, y ponemos la misma frase de enlace que tenemos en el módulo emisor, junto con otras características como el marco regulatorio, la telemetría, etcétera.
Compilamos el firmware y copiamos el archivo a una carpeta creada al efecto. Vamos a nuestro PC, y en el icono de acceso a internet, buscamos la red del receptor. La contraseña para conectar es expresslrs, todo seguido.
Una vez conectemos, escribimos en la barra de direcciones del navegador la dirección .
Nos aparece la página de actualización. Seleccionamos el firmware que acabamos de compilar y pulsamos el botón update.
Cuando termine la actualización, encendemos la emisora, desenchufamos y volvemos a enchufar el receptor, y comprobamos en la pestaña de telemetría que emisora y receptor están enlazados.
Y esto es todo, gracias. Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Способ прошивки ЕЛРС ELRS, самый простой и легкий для меня.
ELRS CrazyF4 Tiny Whoop AIO by Happymodel is seriously a good Flight Controller to consider. A 1S AIO with built in VTX, ELRS RX and ESC built on a 75mm frame really gives you that joy of flight with less anxiety for RX loss.
Today we went to the Singapore Zoo to see the lions as our last two bookings were cancelled due to the Covid restrictions which we then had to cancel. So on this trip, we managed to visit the zoo and see the animals including the African Lion who was tested positive and have now recovered.
A nice place to destress and get out of our usual work norms, the Singapore Zoo offers a getaway far from the city. Of course, I couldnt fly my drones in the area so thankfully I had a good flight earlier with my ELRS 75mm Tiny Whoop.
You can find the updates on the Lions here:-
More on Lion's hit by covid:-
My quad
Happymodel ELRS Crazy F4 2G4 AIO
75mm Happymodel whoop frame(V4)
Caddx Ant camera
Happymodel 25,000Kv motors
NBD 40mm Azi props
Happymodel Official Team Pilots.
And of course not forgetting my teammates Youtube channels:
Nathan Loopz
Joseph De Guzman AKA 'Jiggy'
#besttinywhoop #besttinywhoop2021 #crazyf42g4elrs Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Come Installare e Configurare ExpressLRS + Happymodel Module Review
Ультрабук с самой мощной встройкой на сегодняшний день! Это ASUS Zenbook S 16 на базе Ryzen 9 AI HX 370 с топовым 16-дюймовым OLED экраном.
Zenbook S 16:
Подпишись на канал:
АКТУАЛЬНЫЕ ОБЗОРЫ:
Обзор Snapdragon X-Elite
Топовый игровой ноутбук на RTX 4090
Ноутбук с OLED экраном и 120 Гц
...
Таймкоды:
0:00 Процессорные новинки
1:11 Ryzen 9 AI HX 370
2:04 Бенчмарки и игры
3:49 Работа в программах
5:15 Нейросети
6:34 Самый мощный CPU?
7:26 Zenbook S 16 дизайн
8:34 Экран
10:20 Динамики
11:10 Автономность и нагрев
13:10 Тачпад и клавиатура
...
Присоединяйся:
На сайте:
В Telegram:
В Twitter:
В Instagram:
В Facebook:
#AMD #snapdragon Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Happymodel ELRS reciever🔥/915 MHz/Long Range Rx🔥/Fpvdrones/shorts
Brand: Happymodel
Model: Crux35 Analog
Wheelbase: 150mm
Weight: 87g ( Analog)
Size: 130mmx130mmx45mm(without propellers)
Version : Analog
Receiver : SPI ExpressLRS
Camera : Analog version Ant+OVX303 VTX
Flying time: 9min~15min 4s 850mah battery Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Как же меня все задолбали с вопросами про ELRS! Большое спасибо Вам, друзья! Наконец-то
затестил, вник, и очень удивися всему этому! Короче брать можно, по крайней мере такой готовый набор, особенно на квады, и тем кто юзает 1,3 видео на фпв самолетах!
Купить можно тут: (количество купонов ограничено)
Передатчик
Happymodel ES24TX ExpressLRS ELRS
15% OFF ,20 купонов: BG5db6d7
Приемник из видео
Happymodel ExpressLRS EP1 Receiver
20% OFF,40 купонов: BG1b1608
Приемник с SMD антенной
Happymodel ExpressLRS EP2 Receiver
20% OFF,40 купонов: BG1b1608
Конфигуратор
Инструкция
Мой телеграмм канал
Спасибо за внимание к моему каналу areyouroo аюру !
#areyouroo #аюру
00:00 я Саня, вы на канале аюру, погнали!
00:38 О системе ELRS 2.4
10:10 мой сетап
12:12 Первая попытка, в не прямой видимости
17:05 Вторая попытка в прямой видимости
22:18 Выводы
24:38 Настройка Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Ryzen 9 AI HX 370 против Snapdragon X-Elite - обзор Zenbook S 16!
Dove comprare Happymodel ExpressLRS ELRS ES900TX 868MHz con ricevente coupon
BGcf0d46
Riceventi 2.4 coupon BG880eaa
Video Tutorial di Mirko FPV
Rates Betaflight
Roll RC Rate 0 Rate RC EXPO
Pitch RC Rate 0 Rate RC EXPO
Yaw RC Rate 0 Rate RC EXPO
Abbonati a questo canale per accedere ai vantaggi:
Per supportare il canale in caso devi fare un acquisto puoi passare da questi link e a te non cambia nulla.
Offerte del giorno Amazon:
Canale Telegram Offerte:
Se compri su Banggood:
Cosa comprare per iniziare coi Droni FPV:
Drone24Hours:
Se compri da Aliexpress
La mia radio:
Setup Drone Racing:
Mini Droni BetaFPV:
?sca_ref=
Batterie Drone Coupon hsiafpv:
?sca_ref=
HGLRC codice sconto Matteo6:
La mia attrezzatura:
Instagram:
Gruppo Facebook
Salvadanaio su Paypal per chi volesse supportarmi in modo diretto Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
ExpressLRS is an open source RC link for RC applications. It is based on the fantastic semtech SX127x/SX1280 hardware combined with an ESP8285, ESP32 or STM32. ExpressLRS supports a wide range of hardware platforms as well as both 900 MHz and 2.4 GHz frequency options. ExpressLRS uses LoRa modulation as well as reduced packet size to achieve best in class range and latency compared to current commercial offerings.
Shop ExpressLRS and 900Mhz
Model: ES900TX & ES900RX 915MHz
🛒 ELRS 900MHz -
🛒 ELRS 868MHz -
🛒 ES24TX -
🛒 ES24TX-Lite -
▬ Get Connected ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► YouTube:
► Twitter:
► Facebook:
► Website:
► Github:
▬ Shop my Affiliate Link ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🛒 DJI FPV Drone -
🛒 Express LRS -
🛒 2022 Budget Best Drone -
🛒 GoPro HERO Cameras -
🛒 Insta360 Camera -
🛒 Creality 3D® Ender-3 Pro 3D Printer - h
ExpressLRS can run at various packet rates, up to 500hz or down to 25hz depending on your preference of range or low latency. At 900 MHz a maximum of 200 Hz packet rate is supported. At 2.4 GHz a blistering 500 Hz is currently supported with a custom openTX binary with future plans to extend this to 1000 Hz.
ExpressLRS supports telemetry as optional feature. Enabling telemetry also adds support for the betaflight lua script.
ExpressLRS can be flashed into existing Frsky R9M hardware (RX and TX), Jumper R900 RXs, SiYi FM30 Hardware (Rx and TX), GHOST hardware (RX and TX) or Custom PCBs can be made if you enjoy tinkering. Happy Model released official ExpressLRS hardware (RX and TX) and several other manufacturers are preparing to offer offical ELRS hardware soon so stay tuned.
The video is time indexed so you can move around as you wish. Links to all software, firmware, and the products are included in the description below.
00:00 - Intro
00:39 - What's included in the ELRS box?
02:35 - Step by step installation instruction manual
05:06 - Tips on the SMA connector
08:15 - End credit
Please subscribe if you liked this kind of material. If you appreciate the kind of work I put into making this review, please watch other videos that I have on this channel ranging from all kinds of DIYs, products reviews and occasionally enjoying playing piano.
#chetao #dientu #diy #suachua #huongdan #expresslrs #fpvvietnam #vietnamfpv #dronevietnam #flycam #drone #congnghe Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
TX module : Happymodel ES24TX on 10mw
RX module : Happymodel EP1 RX
Platform: AR Wing Pro Це відео автоматично взято із YouTube за назвою товару, можливий неправильний пошук.
Happymodel ES24TX ExpressLRS ELRS тест дальности, fpv самолет
Ремонт комп'ютерів у Києві: ремонт і обслуговування ПК, модернізація, діагностика і лагодження комп'ютерів за низькими цінами. Васильківська, 55, обслуговування, налаштування, комп'ютерна допомога вдома та в офісі недорого. Купити Приймач (RX) HappyModel ExpressLRS ES900RX 750MHz (2D20050). Швидке заправлення картриджів для будь-якого принтера з гарантією якості від сервісного центру VPS Group по місту Києву. Купити тонер фасований. +38 (093) 290-17-17